When the automatic feeding machine automatic cycle can not start,you can follow the following steps to check and solve:

First,check the power supply

1.Confirm the power connection:First check whether the feeder has been correctly connected to the power supply,and check whether the power plug and wire are damaged or the interface is loose.

2.Power supply stability:Ensure that the power supply voltage is stable without abnormal fluctuations.If conditions permit,you can use a voltmeter to check whether the power supply voltage is within the normal range.

2.Check the control system

Control cabinet inspection:Check whether the power supply voltage of the control cabinet is normal,and whether there is noise or abnormal heating inside the control cabinet.

2.Program check:If the feeder is controlled by PLC or other control system,check whether the control program is correct,whether there is an error or crash phenomenon.If there is a problem,try restarting the control system or contacting a professional to reprogram it.

Third,check the sensor and switch

1.Sensor status:Check whether all sensors on the feeder(such as proximity switches,photoelectric sensors,etc.)are in normal working condition,and whether there is damage or false alarm.

2.Switch check:Confirm that all control switches(such as emergency stop button,start button,etc.)have been correctly reset and are allowed to start.

Four,check the mechanical part

1.Mechanical parts:Check whether the mechanical parts of the feeder(such as rollers,gears,transmission belts,etc.)are damaged or blocked.

2.Adjust parameters:Check and adjust the relevant mechanical parameters(such as roller pressure,feeding speed,etc.)according to the instruction manual of the feeder to ensure that they meet the requirements of use.

5.Contact a professional

If the above steps cannot solve the problem,it is recommended to contact the manufacturer of the feeder or professional maintenance personnel for maintenance.They can use professional equipment and knowledge to quickly locate the problem and give the appropriate solution.

Six,daily maintenance

In order to avoid the recurrence of similar problems,it is recommended to regularly carry out daily maintenance and maintenance of the automatic feeder.This includes cleaning equipment,checking electrical components,replacing worn parts,etc.Through daily maintenance,potential problems can be found and dealt with in time to improve the operational stability and service life of the feeder.